ROVEMA News

Current information from our company

ROVEMA – News

Source: https://www.rovema.com/en/company/news?tmpl=print&news_id=changeover_in_a_jiffy#changeover_in_a_jiffy

Jan 21, 2015

Changeover in a jiffy



Form, fill and seal machines produce bags from films made out of different materials. A key factor for the sealing and tightening of the bags are the heat sealing tools of the machine. Depending on output and packaging material, the material and surface of the sealing jaws are subjected to high strain and have to be replaced on a regular basis.

ROVEMA offers a conversion kit for the cross sealing jaws which increases flexibility and reduces spare parts procurement costs. The sealing jaws, consisting of body and inserts, enable the exchange of the cooled down sealing faces within a few minutes. Whether the toothing is worn or a change to another toothing profile or seal width is necessary, the time-consuming adjustment work needed for a change of the complete jaw body will no longer be required.

The conversion kit consisting of 2 jaw bodies, 4 inserts, electric supply with accessories as well as a set of heating cartridges , temperature probes and insulating plates each guarantees more flexibility, less spare part costs as well as shorter changeover times.

Images for article

Jan 21, 2015, Changeover in a jiffy

Source: https://www.rovema.com/en/company/news?tmpl=print&news_id=changeover_in_a_jiffy#changeover_in_a_jiffy




(https://www.rovema.com/)